R211x-HP Flexfabric 11900 IP Multicast Command Reference

10
Field Descri
p
tion
(S, SUC)
Port attribute:
• D—Dynamic port.
• S—Static port.
• P—PIM port.
• K—Port obtained from the kernel.
• R—Port learned from (*, *) entries.
• W—Port learned from (*, G) entries.
• SUC—Processing succeeds.
• F—Processing fails.
display l2-multicast ip forwarding
Use display l2-multicast ip forwarding to display information about Layer 2 IP multicast group entries.
Syntax
In standalone mode:
display l2-multicast ip forwarding [ group group-address | source source-address ] * [ vlan vlan-id ]
[ slot slot-number ]
In IRF mode:
display l2-multicast ip forwarding [ group group-address | source source-address ] * [ vlan vlan-id ]
[ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
group group-address: Specifies a multicast group by its IP address. If no multicast group is specified, this
command displays information about Layer 2 IP multicast group entries for all multicast groups.
source source-address: Specifies a multicast source by its IP address. If no multicast source is specified,
this command displays information about Layer 2 IP multicast group entries for all multicast sources.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about Layer 2 IP multicast group entries for all VLANs.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the Layer 2 IP multicast group entries on the MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies an IRF member device ID, and the slot-number argument specifies a card by its slot
number. If no member device is specified, this command displays information about the Layer 2 IP
multicast group entries on all MPUs in the IRF fabric. (In IRF mode.)