R211x-HP Flexfabric 11900 IP Multicast Command Reference

163
Field Descri
p
tion
RPF interface Type and number of the RPF interface.
RPF neighbor IPv6 address (link-local address) of the RPF neighbor.
Referenced prefix/prefix length Referenced route and prefix length.
Referenced route type
Type of the referenced route:
• igp—IPv6 IGP unicast route.
• egp—IPv6 EGP unicast route.
• unicast (direct) —IPv6 directly connected unicast route.
• unicast—Other IPv6 unicast route, such as IPv6 unicast
static route.
Route selection rule
RPF route selection rule: An RPF route can be selected by the
priority of the routing protocol or by the longest match of the
destination address in the routing table.
Load splitting rule Whether the load sharing rule is enabled.
Related commands
• display ipv6 multicast forwarding-table
• display ipv6 multicast routing-table
ipv6 multicast boundary
Use ipv6 multicast boundary to configure an IPv6 multicast forwarding boundary.
Use undo ipv6 multicast boundary to delete the specified IPv6 multicast forwarding boundary.
Syntax
ipv6 multicast boundary { ipv6-group-address prefix-length | scope { scope-id | admin-local | global |
organization-local | site-local } }
undo ipv6 multicast boundary { ipv6-group-address prefix-length| all | scope { scope-id | admin-local
| global | organization-local | site-local } }
Default
No IPv6 multicast forwarding boundary is configured.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where "x" and
"y" represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies the address prefix length in the range of 8 to 128.
all: Specifies all IPv6 multicast boundaries configured on the interface.