R211x-HP Flexfabric 11900 IP Multicast Command Reference

166
source-group: Specifies IPv6 multicast load splitting on a per-source basis and on a per-group basis.
Examples
# Enable load splitting of IPv6 multicast traffic on a per-source basis on the public network.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] load-splitting source
longest-match (IPv6 MRIB view)
Use longest-match to configure RPF route selection based on the longest prefix match principle.
Use undo longest-match to restore the default.
Syntax
longest-match
undo longest-match
Default
The route with the highest priority is selected as the RPF route.
Views
IPv6 MRIB view
Predefined user roles
network-admin
mdc-admin
Examples
# Configure RPF route selection based on the longest prefix match principle on the public network.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] longest-match
reset ipv6 multicast forwarding event
Use reset ipv6 multicast forwarding event to clear statistics for IPv6 multicast forwarding events.
Syntax
reset ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding event
Views
User view
Predefined user roles
network-admin
mdc-admin