R211x-HP Flexfabric 11900 IP Multicast Command Reference

12
Parameters
mac-address: Specifies a MAC multicast group by its MAC address. If no MAC multicast group is
specified, this commands displays information about all Layer 2 MAC multicast groups.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about Layer 2 MAC multicast groups for all VLANs.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the Layer 2 MAC multicast groups on the MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies an IRF member device ID, and the slot-number argument specifies a card by its slot
number. If no member device is specified, this command displays information about the Layer 2 MAC
multicast groups on all MPUs in the IRF fabric. (In IRF mode.)
Examples
# Display information about the Layer 2 MAC multicast groups for VLAN 2.
<Sysname> display l2-multicast mac vlan 2
Total 1 MAC entries.
VLAN 2: Total 1 MAC entries.
MAC group address: 0100-5e01-0101
Attribute: success
Host slots (1 in total):
1
Host ports (1 in total):
XGE1/0/1
Table 9 Command output
Field Descri
p
tion
Total 1 MAC entries Total number of Layer 2 MAC multicast groups.
VLAN 2: Total 1 MAC entries Total number of Layer 2 MAC multicast groups in VLAN 2.
Attribute
Entry attribute:
• success—Processing succeeds.
• fail—Processing fails.
Host slots (1 in total)
Total number of cards where member ports reside and the slot IDs of the
cards.
Host ports (1 in total) Total number of member ports and the port list.
display l2-multicast mac forwarding
Use display l2-multicast mac forwarding to display information about Layer 2 MAC multicast group
entries.
Syntax
In standalone mode:
display l2-multicast mac forwarding [ mac-address ] [ vlan vlan-id ] [ slot slot-number ]
In IRF mode: