R211x-HP Flexfabric 11900 IP Multicast Command Reference

185
Table 51 Command output
Field Descri
p
tion
Scope-zone expiry timer Scoped zone aging timer.
Elected BSR address Address of the elected BSR.
Candidate BSR address Address of the candidate BSR.
Priority BSR priority.
Uptime Length of time the BSR has been up.
display ipv6 pim claimed-route
Use display ipv6 pim claimed-route to display information about all routes that IPv6 PIM uses.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] claimed-route [ipv6-source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays information about all routes
that IPv6 PIM uses on the public network.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no IPv6 multicast source is
specified, this command displays information about all routes that IPv6 PIM uses.
Examples
# Display information about all routes that IPv6 PIM uses on the public network.
<Sysname> display ipv6 pim claimed-route
RPF-route selecting rule: longest-match
Route/mask: 7:11::/64 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8::2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7:11::10, ff1e::1)
(7:11::10, ff1e::2)
(7:11::10, ff1e::3)
(*, ff1e::4)
Route/mask: 7:12::/64 (unicast)
RPF interface: Vlan-interface2, RPF neighbor: 8::3,
Total number of (S,G) or (*,G) dependent on this route entry: 2