R211x-HP Flexfabric 11900 IP Multicast Command Reference

186
(7:12::10, ff1e::1)
(7:12::10, ff1e::2)
Table 52 Command output
Field Descri
p
tion
Route/mask
Route entry. Route types in parentheses include:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Directly connected unicast route.
• unicast—Other unicast route, such as static unicast route.
RPF interface Name of the RPF interface.
RPF neighbor IPv6 address of the RPF neighbor.
Total number of (S,G) or (*,G) dependent on
this route entry
Total number (S, G) or (*, G) entries dependent on the RPF
route and their details.
display ipv6 pim c-rp
Use display ipv6 pim c-rp to display C-RP information in the IPv6 PIM-SM domain.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays information about learned
C-RPs on the public network.
local: Specifies local C-RPs. If this keyword is not specified, this command displays information about all
C-RPs.
Usage guidelines
You can display information about learned C-RPs on only the BSR. On other devices, you can display
information about the locally configured C-RPs.
Examples
# Display information about learned C-RPs on the public network.
<Sysname> display ipv6 pim c-rp
Scope: non-scoped
Group/MaskLen: FF00::/8