R211x-HP Flexfabric 11900 IP Multicast Command Reference

193
• dm: Specifies IPv6 PIM-DM.
• sm: Specifies IPv6 PIM-SM.
• ssm: Specifies IPv6 PIM-SSM.
outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing
interface. If you do not specify an outgoing interface, this command displays IPv6 PIM routing entries that
contain all outgoing interfaces. Whether the specified outgoing interface is contained in the IPv6 PIM
routing table depends on the following conditions:
• If you specify an excluded interface, this command displays IPv6 PIM routing entries that do not
contain the specified outgoing interface.
• If you specify an included interface, this command displays IPv6 PIM routing entries that contain the
specified outgoing interface.
• If you specify a matching interface, this command displays IPv6 PIM routing entries that contain
only the specified outgoing interface.
Examples
# Display IPv6 PIM routing table information on the public network.
<Sysname> display ipv6 pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(2001::2, FFE3::101)
RP: FE80::A01:100:1
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: Vlan-interface1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47
# Display the state machine information of the IPv6 PIM routing table on the public network.
<Sysname> display ipv6 pim routing-table fsm
Total 0 (*, G) entry; 1 (S, G) entry
Abbreviations for FSM states:
NI - no info, J - joined, NJ - not joined, P - pruned,
NP - not pruned, PP - prune pending, W - winner, L - loser,
F - forwarding, AP - ack pending, DR - designated router,
NDR - non-designated router, RCV - downstream receivers
(2001::2, FFE3::101)
RP: FE80::A01:100:1
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: Vlan-interface1
Upstream neighbor: NULL
RPF prime neighbor: NULL