R211x-HP Flexfabric 11900 IP Multicast Command Reference

194
Join/Prune FSM: [SPT: J] [RPT: NP]
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47
DR state: [DR]
Join/Prune FSM: [NI]
Assert FSM: [NI]
FSM information for non-downstream interfaces: None
Table 57 Command output
Field Descri
p
tion
Total 0 (*, G) entry; 1 (S, G) entry
Total number of (S, G) entries and (*, G) entries in the IPv6 PIM routing
table.
(2001::2, FFE3::101) (S, G) entry in the IPv6 PIM routing table.
Protocol IPv6 PIM mode: IPv6 PIM-SM or IPv6 PIM-DM.
Flag
Flag of the (S, G) entry or (*, G) entry:
• ACT—The entry has been used for routing data.
• DEL—The entry will be removed.
• EXPRUNE—Some outgoing interfaces are pruned by other IPv6
multicast routing protocols.
• EXT—The entry contains outgoing interfaces provided by other
multicast routing protocols.
• LOC—The entry is on a router directly connected to the same subnet
with the IPv6 multicast source.
• NIIF—The entry contains unknown incoming interfaces.
• NONBR—The entry has an IPv6 PIM neighbor lookup failure.
• RPT—The entry is on a RPT branch where (S, G) prunes have been sent
to the RP.
• SPT—The entry is on the SPT.
• SWT—The entry is in the process of RPT-to-SPT switchover.
• WC—The entry contains a wildcard.
Uptime Length of time since the (S, G) entry or (*, G) entry was installed.
Upstream interface Upstream (incoming) interface of the (S, G) entry or (*, G) entry.
Upstream neighbor Upstream neighbor of the (S, G) entry or (*, G) entry.
RPF prime neighbor
RPF neighbor of the (S, G) or (*, G) entry:
• For a (*, G) entry, if the RPF neighbor is the RP, the field is displayed as
NULL.
• For an (S, G) entry, if the RPF neighbor is a router that directly connects
to the IPv6 multicast source, this field is displayed as NULL.