R211x-HP Flexfabric 11900 IP Multicast Command Reference

198
hello-option dr-priority (IPv6 PIM view)
Use hello-option dr-priority to set the global priority for DR election.
Use undo hello-option dr-priority to restore the default.
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
Default
The global priority for DR election is 1.
Views
IPv6 PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
priority: Sets the priority for DR election, in the range of 0 to 4294967295. A larger value represents a
higher priority.
Usage guidelines
You can set the priority for DR election in IPv6 PIM view or interface view. The configurations made in
IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are effective
on only the current interface. If you set the priority for DR election in both IPv6 PIM view and interface
view, the configuration in interface view always takes precedence.
Examples
# Set the global priority for DR election to 3 on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option dr-priority 3
Related commands
ipv6 pim hello-option dr-priority
hello-option holdtime (IPv6 PIM view)
Use hello-option holdtime to set the global IPv6 PIM neighbor lifetime.
Use undo hello-option holdtime to restore the default.
Syntax
hello-option holdtime time
undo hello-option holdtime
Default
The global IPv6 PIM neighbor lifetime is 105 seconds.