R211x-HP Flexfabric 11900 IP Multicast Command Reference

202
undo holdtime join-prune
Default
The global joined/pruned state holdtime timer is 210 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Sets the joined/pruned state holdtime timer in the range of 1 to 65535 seconds.
Usage guidelines
You can set the joined/pruned state holdtime timer in IPv6 PIM view or interface view. The configurations
made in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the joined/pruned state holdtime timer in both IPv6 PIM
view and interface view, the configuration in interface view always takes precedence.
Examples
# Set the global joined/pruned state holdtime timer to 280 seconds on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] holdtime join-prune 280
Related commands
ipv6 pim holdtime join-prune
ipv6 pim
Use ipv6 pim to enter IPv6 PIM view.
Use undo ipv6 pim to remove all configurations in IPv6 PIM view.
Syntax
ipv6 pim [ vpn-instance vpn-instance-name ]
undo ipv6 pim [ vpn-instance vpn-instance-name ]
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, you enter public network IPv6 PIM view.