R211x-HP Flexfabric 11900 IP Multicast Command Reference

203
Examples
# Enable IPv6 multicast routing on the public network and enter public network IPv6 PIM view.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] ipv6 pim
[Sysname-pim6]
# Enable IPv6 multicast routing in VPN instance mvpn and enter IPv6 PIM view of VPN instance mvpn.
<Sysname> system-view
[Sysname] ipv6 multicast routing vpn-instance mvpn
[Sysname-mrib6-mvpn] quit
[Sysname] ipv6 pim vpn-instance mvpn
[Sysname-pim6-mvpn]
ipv6 pim bfd enable
Use ipv6 pim bfd enable to enable BFD for IPv6 PIM.
Use undo ipv6 pim bfd enable to disable BFD for IPv6 PIM.
Syntax
ipv6 pim bfd enable
undo ipv6 pim bfd enable
Default
BFD is disabled for IPv6 PIM.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This feature does not take effect unless you enable IPv6 PIM-DM or IPv6 PIM-SM on an interface before
you configure this feature.
Examples
# On the public network, enable IPv6 multicast routing, enable IPv6 PIM-DM on interface VLAN-interface
100, and enable BFD for IPv6 PIM on the interface.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim dm
[Sysname-Vlan-interface100] ipv6 pim bfd enable
Related commands
• ipv6 pim dm