R211x-HP Flexfabric 11900 IP Multicast Command Reference

211
undo ipv6 pim require-genid
Default
Hello messages without the generation ID options are accepted.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable VLAN-interface 100 to drop hello messages without the generation ID options.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim require-genid
ipv6 pim sm
Use ipv6 pim sm to enable IPv6 PIM-SM.
Use undo ipv6 pim sm to disable IPv6 PIM-SM.
Syntax
ipv6 pim sm
undo ipv6 pim sm
Default
IPv6 PIM-SM is disabled.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command takes effect only after you enable IPv6 multicast routing in the public network or VPN
instance.
Examples
# On the public network, enable IPv6 multicast routing, and enable IPv6 PIM-SM on VLAN-interface
100.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim sm