R211x-HP Flexfabric 11900 IP Multicast Command Reference

212
Related commands
ipv6 multicast routing
ipv6 pim state-refresh-capable
Use ipv6 pim state-refresh-capable to enable the state refresh feature on the interface.
Use undo ipv6 pim state-refresh-capable to disable the state refresh feature.
Syntax
ipv6 pim state-refresh-capable
undo ipv6 pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable state refresh on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo ipv6 pim state-refresh-capable
Related commands
• state-refresh-hoplimit (IPv6 PIM view)
• state-refresh-interval (IPv6 PIM view)
• state-refresh-rate-limit (IPv6 PIM view)
ipv6 pim timer graft-retry
Use ipv6 pim timer graft-retry to set the graft retry timer.
Use undo ipv6 pim timer graft-retry to restore the default.
Syntax
ipv6 pim timer graft-retry interval
undo ipv6 pim timer graft-retry
Default
The graft retry timer is 3 seconds.
Views
Interface view