R211x-HP Flexfabric 11900 IP Multicast Command Reference

215
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
delay: Sets the maximum delay between two hello messages, in the range of 1 to 60 seconds.
Examples
# Set the maximum delay between two hello messages to 3 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim triggered-hello-delay 3
jp-pkt-size (IPv6 PIM view)
Use jp-pkt-size to set the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size size
undo jp-pkt-size
Default
The maximum size of a join/prune message is 8100 bytes.
Views
IPv6 PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
size: Sets the maximum size of each join/prune message, in the range of 100 to 64000 bytes.
Examples
# Set the maximum size of each join/prune message to 1500 bytes on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] jp-pkt-size 1500
register-policy (IPv6 PIM view)
Use register-policy to configure an IPv6 ACL rule to filter register messages.
Use undo register-policy to remove the configured register filtering rule.