R211x-HP Flexfabric 11900 IP Multicast Command Reference

216
Syntax
register-policy acl6-number
undo register-policy
Default
No register filtering rule is configured.
Views
IPv6 PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
acl6-number: Specifies an IPv6 advanced ACL number in the range of 3000 to 3999.
Usage guidelines
Use an IPv6 advanced ACL to filter register messages based on source IPv6 addresses and IPv6 multicast
group addresses. If you specify a VPN instance in the ACL, the ACL does not take effect. The other
optional parameters except the time-range keyword and the fragment keyword are ignored. The RP
accepts only register messages that match the permit statement of the ACL.
Examples
# On the public network, configure a register filtering policy on the RP so that the RP can accept only
those register messages from IPv6 multicast sources on the 3:1::/64 subnet for IPv6 multicast groups on
the FF0E:13::/64 subnet.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule permit ipv6 source 3:1:: 64 destination ff0e:13:: 64
[Sysname-acl6-adv-3000] quit
[Sysname] ipv6 pim
[Sysname-pim6] register-policy 3000
register-whole-checksum (IPv6 PIM view)
Use register-whole-checksum to configure the device to calculate the checksum based on an entire
register message.
Use undo register-whole-checksum to restore the default.
Syntax
register-whole-checksum
undo register-whole-checksum
Default
The device calculates the checksum based on the header of a register message.
Views
IPv6 PIM view