R211x-HP Flexfabric 11900 IP Multicast Command Reference

217
Predefined user roles
network-admin
mdc-admin
Examples
# On the public network, configure the device to calculate the checksum based on an entire register
message.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] register-whole-checksum
source-lifetime (IPv6 PIM view)
Use source-lifetime to set the IPv6 multicast source lifetime.
Use undo source-lifetime to restore the default.
Syntax
source-lifetime time
undo source-lifetime
Default
The lifetime of an IPv6 multicast source is 210 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Sets the IPv6 multicast source lifetime in the range of 0 to 31536000 seconds. If the value for this
argument is 0, IPv6 multicast sources are never aged out.
Examples
# Set the IPv6 multicast source lifetime to 200 seconds on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] source-lifetime 200
source-policy (IPv6 PIM view)
Use source-policy to configure an IPv6 multicast data filter.
Use undo source-policy to remove the configured IPv6 multicast data filter.
Syntax
source-policy acl6-number
undo source-policy