R211x-HP Flexfabric 11900 IP Multicast Command Reference

29
Examples
# Configure Ten-GigabitEthernet 1/0/1 in VLAN 2 as a static member port for the multicast source and
g r o u p (1.1.1.1, 2 2 5 . 0 . 0 .1) .
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
[Sysname-vlan2] quit
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] igmp-snooping static-group 225.0.0.1 source-ip
1.1.1.1 vlan 2
igmp-snooping static-router-port
Use igmp-snooping static-router-port to configure a port as a static router port.
Use undo igmp-snooping static-router-port to restore the default.
Syntax
igmp-snooping static-router-port vlan vlan-id
undo igmp-snooping static-router-port { all | vlan vlan-id }
Default
A port is not a static router port.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Specifies all VLANs.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Configure Ten-GigabitEthernet 1/0/1 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] igmp-snooping static-router-port vlan 2
igmp-snooping version
Use igmp-snooping version to specify the IGMP snooping version.
Use undo igmp-snooping version to restore the default.