R211x-HP Flexfabric 11900 IP Multicast Command Reference

33
undo report-aggregation
Default
IGMP report suppression is enabled.
Views
IGMP-snooping view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable IGMP report suppression.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] undo report-aggregation
reset igmp-snooping group
Use reset igmp-snooping group to remove the dynamic IGMP snooping forwarding entries for the
specified multicast groups.
Syntax
reset igmp-snooping group { group-address [ source-address ] | all } [ vlan vlan-id ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to
239.255.255.255.
source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this
command removes the dynamic IGMP snooping forwarding entries for all multicast sources.
all: Specifies all multicast groups.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Remove the dynamic IGMP snooping forwarding entries for all multicast groups.
<Sysname> reset igmp-snooping group all
Related commands
display igmp-snooping group