R211x-HP Flexfabric 11900 IP Multicast Command Reference

35
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The default setting is 260 seconds.
Views
IGMP-snooping view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies an aging timer (in seconds) for dynamic router ports, in the range of 1 to 1000.
Usage guidelines
The global configuration is effective on all VLANs, but it has a lower priority than the configuration made
in a specific VLAN.
Examples
# Set the global aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] router-aging-time 100
Related commands
igmp-snooping router-aging-time
source-deny (IGMP-snooping view)
Use source-deny to enable multicast source port filtering on one or multiple ports to filter out all the
received multicast data packets. This allows the ports to connect to only multicast receivers rather than to
multicast sources.
Use undo source-deny to disable multicast source port filtering on one or multiple ports.
Syntax
source-deny port interface-list
undo source-deny port interface-list
Default
Multicast source port filtering is disabled, and the ports can connect to both multicast sources and
multicast receivers.
Views
IGMP-snooping view