R211x-HP Flexfabric 11900 IP Multicast Command Reference

46
Table 16 Major value of the flag field
Value Meanin
g
0x0 Correct forwarding entry.
0x1 The (S, G) entry is in inactive status.
0x2 Null forwarding entry.
0x4 The (S, G) entry failed to update.
0x8 Some outgoing interface failed to update the (S, G) entry.
0x10 The (S, G) entry in the switch group failed to update.
0x20 A register outgoing interface is available.
0x40 The (S, G) entry is to be deleted.
0x80 The (S, G) entry is in state of registration suppression.
0x100 The (S, G) entry is being deleted.
0x200 The (S, G) entry is in smoothing state.
0x800 The (S, G) entry has the ARP entry of the multicast source address.
Related commands
reset multicast forwarding-table
display multicast routing-table
Use display multicast routing-table to display multicast routing table information.
Syntax
display multicast [ vpn-instance vpn-instance-name ] routing-table [ source-address [ mask { mask-length
| mask } ] | group-address [ mask { mask-length | mask } ] | incoming-interface interface-type
interface-number | outgoing-interface { exclude | include | match } interface-type interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays information about the multicast
routing table on the public network.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.