R211x-HP Flexfabric 11900 IP Multicast Command Reference

47
mask-length: Specifies the address mask length. The default value is 32. For a multicast group address,
the value range for this argument is 4 to 32. For a multicast source address, the value range for this
argument is 0 to 32.
mask: Specifies the address mask. The default is 255.255.255.255.
incoming-interface: Specifies the multicast routing entries that include the specified incoming interface.
interface-type interface-number: Specifies an incoming interface by its type and number.
outgoing-interface: Specifies the multicast routing entries that include the specified outgoing interface.
exclude: Specifies the multicast routing entries that do not include the specified interface in the outgoing
interface list.
include: Specifies the multicast routing entries that include the specified interface in the outgoing
interface list.
match: Specifies the multicast routing entries that include only the specified interface in the outgoing
interface list.
Usage guidelines
Multicast routing tables are the basis of multicast forwarding. You can display the establishment state of
an (S, G) entry by examining the multicast routing table.
Examples
# Display multicast routing table information on the public network.
<Sysname> display multicast routing-table
Total 1 entry
00001. (172.168.0.2, 227.0.0.1)
Uptime: 00:00:28
Upstream Interface: Vlan-interface1
List of 2 downstream interfaces
1: Vlan-interface2
2: Vlan-interface3
Table 17 Command output
Field Descri
p
tion
Total 1 entry Total number of (S, G) entries in the multicast routing table.
00001 Sequence number of the (S, G) entry.
(172.168.0.2, 227.0.0.1) (S, G) entry of the multicast forwarding table.
Uptime Length of time for which the (S, G) entry has been up.
Upstream Interface
Upstream interface of the (S, G) entry that multicast packets should
arrive at.
List of 2 downstream interfaces List of downstream interfaces that need to forward multicast packets.
Related commands
reset multicast routing-table