R211x-HP Flexfabric 11900 IP Multicast Command Reference

48
display multicast routing-table static
Use display multicast routing-table static to display static multicast routing entries.
Syntax
display multicast [ vpn-instance vpn-instance-name ] routing-table static [ source-address { mask-length
| mask } ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays information about static
multicast routes on the public network.
source-address: Specifies a multicast source address.
mask-length: Specifies the address mask length in the range of 0 to 32.
mask: Specifies the address mask.
Usage guidelines
This command displays information about only valid static multicast routes.
Examples
# Display information about static multicast routing entries on the public network.
<Sysname> display multicast routing-table static
Destinations : 3 Routes : 4
Destination/Mask Pre RPF Neighbor Interface
1.1.0.0/16 10 7.12.0.1 Vlan12
7.11.0.1 Vlan11
2.2.2.0/24 20 7.11.0.1 Vlan11
3.3.3.3/32 50 7.12.0.1 Vlan12
Table 18 Command output
Field Descri
p
tion
Destinations Number of the multicast destination addresses.
Routes Number of routes.
Destination/Mask Destination address and mask length.
Pre Route preference.
RPF Neighbor IP address of the RPF neighbor to the reachable destination.
Interface Outgoing interface to the reachable destination.