R211x-HP Flexfabric 11900 IP Multicast Command Reference

49
display multicast rpf-info
Use display multicast rpf-info to display RPF information for multicast sources.
Syntax
display multicast [ vpn-instance vpn-instance-name ] rpf-info source-address [ group-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays RPF information for multicast
sources on the public network.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255.
Examples
# Display the RPF information of multicast source 192.168.1.55 on the public network.
<Sysname> display multicast rpf-info 192.168.1.55
RPF information about source 192.168.1.55:
RPF interface: Vlan-interface1, RPF neighbor: 10.1.1.1
Referenced route/mask: 192.168.1.0/24
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
Table 19 Command output
Field Descri
p
tion
RPF neighbor IP address of the RPF neighbor.
Referenced route/mask Referenced route and its mask length.
Referenced route type
Type of the referenced route:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Directly connected unicast route.
• unicast—Other unicast routes, such as static unicast route.
• multicast static—Static multicast route.