R211x-HP Flexfabric 11900 IP Multicast Command Reference

52
source-group: Specifies load splitting both on a per-source basis and on a per-group basis.
Examples
# Enable load splitting of multicast traffic on a per-source basis on the public network.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] load-splitting source
longest-match (MRIB view)
Use longest-match to configure the device to select the RPF route based on the longest prefix match
principle.
Use undo longest-match to restore the default.
Syntax
longest-match
undo longest-match
Default
The device selects the route with the highest priority as the RPF route.
Views
MRIB view
Predefined user roles
network-admin
mdc-admin
Examples
# Configure the device to select the RPF route based on the longest prefix match principle on the public
network.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] multicast longest-match
mac-address multicast
Use mac-address multicast to configure a static multicast MAC address entry.
Use undo mac-address multicast to delete a static multicast MAC address entry.
Syntax
In system view:
mac-address multicast mac-address interface interface-list vlan vlan-id
undo mac-address [ multicast ] [ [ mac-address [ interface interface-list ] ] vlan vlan-id ]
In Ethernet interface view or Layer 2 aggregate interface view:
mac-address multicast mac-address vlan vlan-id
undo mac-address [ multicast ] mac-address vlan vlan-id