R211x-HP Flexfabric 11900 IP Multicast Command Reference

65
mdc-admin
Parameters
group-address: Specifies a multicast group by its address in the range of 224.0.1.0 to 239.255.255.255.
source-address: Specifies a multicast source address. If this argument is not specified, the command
configures an interface as a static member of the multicast groups with all multicast source addresses.
all: Specifies all multicast groups that the interface has statically joined.
Usage guidelines
If the specified multicast address is in the SSM multicast address range, you must specify a multicast
source address at the same time. Otherwise, IGMP routing entries cannot be established. No such a
restriction exists if the specified multicast group address is not in the SSM multicast address range.
Examples
# Configure VLAN-interface 100 as a static member of the multicast group 224.1.1.1.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp static-group 224.1.1.1
# Configure VLAN-interface 100 as a static member of the multicast source and group (192.168.1.1,
232.1.1.1).
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp static-group 232.1.1.1 source 192.168.1.1
igmp version
Use igmp version to specify the IGMP version for an interface.
Use undo igmp version to restore the default.
Syntax
igmp version version-number
undo igmp version
Default
The default IGMP version is version 2.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
version-number: Specifies an IGMP version in the range of 1 to 3.
Examples
# Specify IGMPv1 for VLAN-interface 100.
<Sysname> system-view