R211x-HP Flexfabric 11900 IP Multicast Command Reference

69
Default
BSR address range is not defined, and bootstrap messages from any multicast sources are regarded
valid.
Views
PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
acl-number: Specifies an IPv4 basic ACL by its number in the range of 2000 to 2999.
Usage guidelines
In an ACL, the source field specifies the source address range for the legal BSR. If you specify a VPN
instance in the ACL, the ACL does not take effect. The other optional parameters except the time-range
keyword and the fragment keyword are ignored.
Examples
# On the public network, configure the legal BSR address range to 10.1.1.0/24, so that only the devices
on the subnet 10.1.1.0/24 can act as the BSR.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] bsr-policy 2000
Related commands
c-bsr (PIM view)
c-bsr (PIM view)
Use c-bsr to configure a candidate-BSR (C-BSR).
Use undo c-bsr to remove a C-BSR.
Syntax
c-bsr ip-address [ scope group-address { mask-length | mask } ] [ hash-length hash-length | priority
priority ] *
undo c-bsr ip-address [ scope group-address { mask-length | mask } ]
Default
No C-BSR is configured.
Views
PIM view
Predefined user roles
network-admin