R211x-HP Flexfabric 11900 IP Multicast Command Reference

75
Field Descri
p
tion
Link: ADM - administratively
down; Stby - standby
Physical link state of the interface:
• UP—The link is up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To recover its
physical state, use the undo shutdown command.
• Stby—The link is a backup link. To display information about the primary
interface, use the display interface-backup command.
Protocol: (s) - spoofing
If the Protocol field of the interface contains "(s)", it means one of the
following conditions:
• The data link protocol state of the interface is up, but no link is present on
the interface.
• The link is not permanent. Instead, it is created on demand.
Typically, null interfaces or loopback interfaces have this attribute.
Protocol
Protocol connection state of the interface. This field always displays double
hyphens (--).
Main IP IP address of the interface. This field always displays double hyphens (--).
Cause
Causes why the physical state of the interface is down. This field always
displays Not connected.
display pim bsr-info
Use display pim bsr-info to display BSR information in the PIM-SM domain.
Syntax
display pim [ vpn-instance vpn-instance-name ] bsr-info
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays BSR information on the public
network.
Examples
# Display BSR information in the PIM-SM domain on the public network.
<Sysname> display pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:44