R211x-HP Flexfabric 11900 IP Multicast Command Reference

84
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays PIM routing table information
on the public network.
group-address: Specifies a multicast group by its IP address in the range of 224.0.0.0 to
239.255.255.255. If you do not specify a multicast group, this command displays PIM routing entries for
all multicast groups.
source-address: Specifies a multicast source by its IP address.
mask-length: Specifies the address mask length in the range of 0 to 32. The default value is 32.
mask: Specifies the address mask. The default value is 255.255.255.255.
flags flag-value: Specifies a flag. If you do not specify a flag, this command displays PIM routing entries
that contain all flags. The following lists the values of the flag-value argument and their meanings:
• act: Specifies PIM routing entries that have been used for routing data.
• del: Specifies PIM routing entries to be deleted.
• exprune: Specifies PIM routing entries containing outgoing interfaces pruned by other multicast
routing protocols.
• ext: Specifies PIM routing entries containing outgoing interfaces provided by other multicast routing
protocols.
• loc: Specifies PIM routing entries on the devices that reside on the same subnet as the multicast
source.
• niif: Specifies PIM routing entries containing unknown incoming interfaces.
• nonbr: Specifies PIM routing entries with PIM neighbor lookup failure.
• rpt: Specifies PIM routing entries on the RPT branches where (S, G) prunes have been sent to the RP.
• spt: Specifies PIM routing entries on the SPT.
• swt: Specifies PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify an incoming interface, this command displays PIM routing entries that contain all incoming
interfaces.
mode mode-type: Specifies a PIM mode. If you do not specify a PIM mode, this command displays PIM
routing entries in all PIM modes. The available PIM modes include:
• dm: Specifies PIM-DM.
• sm: Specifies PIM-SM.
• ssm: Specifies PIM-SSM.
outgoing-interface { exclude | include | match } interface-type
in
terface-number: Specifies an outgoing
interface. If you do not specify an outgoing interface, this command displays PIM routing entries that
contain all outgoing interfaces. Whether the specified outgoing interface is contained in the PIM routing
table depends on the following conditions:
• If you specify an excluded interface, this command displays PIM routing entries that do not contain
the specified outgoing interface.