R211x-HP Flexfabric 11900 IP Multicast Command Reference

85
• If you specify an included interface, this command displays PIM routing entries that contain the
specified outgoing interface.
• If you specify a matching interface, this command displays PIM routing entries that contain only the
specified outgoing interface.
Examples
# Display PIM routing table information on the public network.
<Sysname> display pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(172.168.0.12, 227.0.0.1)
RP: 2.2.2.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: Vlan-interface1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47
Table 29 Command output
Field Descri
p
tion
Total 0 (*, G) entry; 1 (S, G) entry Total number of (S, G) entries and (*, G) entries in the PIM routing table.
(172.168.0.12, 227.0.0.1) (S, G) entry in the PIM routing table.
Protocol PIM mode.
Flag
Flag of the (S, G) entry or (*, G) entry:
• ACT—The entry has been used for routing data.
• DEL—The entry will be removed.
• EXPRUNE—Some outgoing interfaces are pruned by other multicast
routing protocols.
• EXT—The entry contains outgoing interfaces provided by other
multicast routing protocols.
• LOC—The entry is on a router directly connected to the same subnet
with the multicast source.
• NIIF—The entry contains unknown incoming interfaces.
• NONBR—The entry has a PIM neighbor lookup failure.
• RPT—The entry is on a RPT branch where (S, G) prunes have been sent
to the RP.
• SPT—The entry is on the SPT.
• SWT—The entry is in the process of RPT-to-SPT switchover.
• WC—The entry contains a wildcard.
Uptime Length of time since the (S, G) entry or (*, G) entry was installed.
Upstream interface Upstream (incoming) interface of the (S, G) entry or (*, G) entry.
Upstream neighbor Upstream neighbor of the (S, G) entry or (*, G) entry.