R211x-HP Flexfabric 11900 IP Multicast Configuration Guide

185
1002::2 (local) 192 180 00:02:03 00:02:56
Group/MaskLen: FFF4::/16
RP address Priority HoldTime Uptime Expires
1002::2 (local) 192 180 00:02:03 00:02:56
Group/MaskLen: FF04::/16
RP address Priority HoldTime Uptime Expires
1002::2 (local) 192 180 00:02:03 00:02:56
# Display RP information on Switch F.
[SwitchF] display ipv6 pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF00::/8
RP address Priority HoldTime Uptime Expires
8001::1 (local) 192 180 00:10:28 00:02:31
IPv6 PIM-SSM configuration example
Network requirements
As shown in Figure 56:
• Receivers receive VOD information through multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM
domain operates in the SSM mode.
• Host A and Host C are IPv6 multicast receivers in two stub networks N1 and N2.
• The SSM group range is FF3E::/64.
• MLDv2 runs between Switch A and N1 and between Switch B, Switch C, and N2.