R211x-HP Flexfabric 11900 IP Multicast Configuration Guide

# On Switch A, enable IP multicast routing.

<SwitchA> system-view

[SwitchA] multicast routing

[SwitchA-mrib] quit

# Enable IGMP on VLAN-interface 100 (the interface that connects to the stub network).

[SwitchA] interface vlan-interface 100

[SwitchA-Vlan-interface100] igmp enable

[SwitchA-Vlan-interface100] quit

# Enable PIM-DM on VLAN-interface 101.

[SwitchA] interface vlan-interface 101

[SwitchA-Vlan-interface101] pim dm

[SwitchA-Vlan-interface101] quit

# On Switch B, enable IP multicast routing.

<SwitchB> system-view

[SwitchB] multicast routing

[SwitchB-mrib] quit

# Enable IGMP on VLAN-interface 200 (the interface that connects to the stub network).

[SwitchB] interface vlan-interface 200

[SwitchB-Vlan-interface200] igmp enable

[SwitchB-Vlan-interface200] quit

# Enable PIM-DM on VLAN-interface 201.

[SwitchB] interface vlan-interface 201

[SwitchB-Vlan-interface201] pim dm

[SwitchB-Vlan-interface201] quit

# On Switch C, enable IP multicast routing.

<SwitchC> system-view

[SwitchC] multicast routing

[SwitchC-mrib] quit

# Enable IGMP on VLAN-interface 200 (the interface that connects to the stub network).

[SwitchC] interface vlan-interface 200

[SwitchC-Vlan-interface200] igmp enable

[SwitchC-Vlan-interface200] quit

# Enable PIM-DM on VLAN-interface 202.

[SwitchC] interface vlan-interface 202

[SwitchC-Vlan-interface202] pim dm

[SwitchC-Vlan-interface202] quit

4. Configure a multicast group filter on Switch A, specifying the multicast group that the hosts

connected to VLAN-interface 100 can join to 224.1.1.1.

[SwitchA] acl number 2001

[SwitchA-acl-basic-2001] rule permit source 224.1.1.1 0

[SwitchA-acl-basic-2001] quit

[SwitchA] interface vlan-interface 100

[SwitchA-Vlan-interface100] igmp group-policy 2001

[SwitchA-Vlan-interface100] quit