R211x-HP Flexfabric 11900 IP Multicast Configuration Guide

87
Task Command
Display PIM neighbor
information.
display pim [ vpn-instance vpn-instance-name ] neighbor [ neighbor-address
| interface interface-type interface-number | verbose ] *
Display PIM routing table
information.
display pim [ vpn-instance vpn-instance-name ] routing-table
[ group-address [ mask { mask-length | mask } ] | source-address [ mask
{ mask-length | mask } ] | flags flag-value | fsm | incoming-interface
interface-type interface-number | mode mode-type | outgoing-interface
{ exclude | include | match } interface-type interface-number ] *
Display RP information in the
PIM-SM domain.
display pim [ vpn-instance vpn-instance-name ] rp-info [ group-address ]
Display statistics for PIM
packets.
display pim statistics
PIM configuration examples
PIM-DM configuration example
Network requirements
As shown in Figure 32:
• VOD streams are sent to receiver hosts in multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network.
• The entire PIM domain operates in the dense mode.
• Host A and Host C are multicast receivers in two stub networks.
• IGMPv2 runs between Switch A and N1 and between Switch B, Switch C, and N2.