R211x-HP Flexfabric 11900 IRF Command Reference

9
Syntax
display mad [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
verbose: Displays detailed MAD information. If this keyword is not provided, the command only displays
whether a MAD mechanism is enabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled.
MAD BFD disabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Current MAD status: Detect
Excluded ports(configurable):
Ten-GigabitEthernet2/1/0/2
Ten-GigabitEthernet2/1/0/3
Excluded ports(can not be configured):
Ten-GigabitEthernet1/9/0/1
Ten-GigabitEthernet1/9/0/2
Ten-GigabitEthernet1/9/0/3
Ten-GigabitEthernet1/9/0/4
Ten-GigabitEthernet2/9/0/1
Ten-GigabitEthernet2/9/0/2
Ten-GigabitEthernet2/9/0/3
Ten-GigabitEthernet2/9/0/4
MAD ARP disabled.
MAD ND disabled.
MAD enabled aggregation port:
Bridge-Aggregation2
MAD BFD enabled interface:
Vlan-interface2
mad ip address 10.0.0.2 255.255.0.0 member 1
mad ip address 10.0.0.3 255.255.0.0 member 2