R211x-HP Flexfabric 11900 IRF Command Reference

28
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
When MAD detects that an IRF fabric has split into multiple IRF fabrics, it sets one of the IRF fabrics to the
Detect state and all other IRF fabrics to the Recovery state.
• The Detect-state IRF fabric is active and can continue to forward traffic.
• The Recovery-state IRF fabrics are inactive. MAD shuts down all their physical ports except the IRF
ports and the ports manually configured to not shut down.
If the active IRF fabric has failed to work before the IRF split problem is fixed, use this command to restore
an IRF fabric in Recovery state to take over the active IRF fabric role.
Examples
# Restore the normal MAD state of the IRF fabric in Recovery state.
<Sysname> system-view
[Sysname] mad restore
This command will restore the device from multi-active conflict state. Continue? [Y/N]:Y
Restoring from multi-active conflict state, please wait...
port group interface
Use port group interface to bind a physical port to an IRF port.
Use undo port group interface to remove the binding of a physical port and an IRF port.
Syntax
port group interface interface-type interface-number [ mode { enhanced | normal } ]
undo port group interface interface-name
Default
No physical ports are bound to any IRF port. After bound to an IRF port, a physical port operates in
enhanced mode.
Views
IRF port view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type interface-number: Specifies a physical port by its type and number.
interface-name: Specifies a physical port in the interface-typeinterface-number format. No space is
allowed between the interface-type and interface-number arguments.
mode: Specifies a binding mode for the physical IRF port.