R211x-HP Flexfabric 11900 IRF Command Reference

mdc-admin

mdc-operator

Examples

# Display the IRF fabric topology.

<Sysname> display irf topology

Topology Info

-------------------------------------------------------------------------

IRF-Port1 IRF-Port2

MemberID Link neighbor Link neighbor Belong To

1 UP 3 UP 2 00e0-fc0f-8c0f

2 UP 1 UP 4 00e0-fc0f-8c0f

3 UP 4 UP 1 00e0-fc0f-8c0f

4 UP 2 UP 3 00e0-fc0f-8c0f

Figure 1 IRF topology

Table 4 Command output

Field Descri

tion

IRF-Port 1 Information about IRF-port 1, including its link state and neighbor.

IRF-Port 2 Information about IRF-port 2, including its link state and neighbor.

Link

Link state of the IRF port:

• UP—IRF link is up.

• DOWN—IRF link is down.

• DIS—No physical ports have been bound to the IRF port. You must use the

port group interface command to bind at least one physical port to the IRF

port.

• TIMEOUT—IRF hello interval has timed out. You must examine the link for a

connection loss.

neighbor

IRF member ID of the device connected to the IRF port.

If no device is connected to the IRF port, this field displays three hyphens (---).

Belong To

IRF fabric that has the device, represented by the CPU MAC address of the

master in the IRF fabric.

display irf-port load-sharing mode

Use display irf-port load-sharing mode to display IRF link load sharing mode.

IRF-port1/2 IRF-port2/1

IRF-port1/1

IRF-port2/2

IRF-port3/2

IRF-port3/1 IRF-port4/2

IRF-port4/1