R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

94
Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups that
correspond to Layer 2 aggregate interfaces.
interface-number: Specifies an existing aggregate interface by its number.
Usage guidelines
If you specify only the bridge-aggregation keyword, this command displays information about all Layer
2 aggregation groups.
If you do not specify the bridge-aggregation keyword, this command displays information about all
aggregation groups.
The bridge-aggregation keyword is available only after you create Layer 2 aggregate interfaces on the
switch.
Examples
# Display detailed information about the aggregation group that corresponds to Layer 2 aggregate
interface Bridge-Aggregation 10, which is a dynamic aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation10
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port Status Priority Oper-Key Flag
--------------------------------------------------------------------------------
XGE1/0/1 S 32768 2 {ACDEF}
XGE1/0/2 S 32768 2 {ACDEF}
Remote:
Actor Partner Priority Oper-Key SystemID Flag
--------------------------------------------------------------------------------
XGE1/0/1 1 32768 2 0x8000, 000f-e267-57ad {ACDEF}