R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

95
XGE1/0/2 2 32768 2 0x8000, 000f-e267-57ad {ACDEF}
# Display detailed information about the aggregation group that corresponds to Layer 2 aggregate
interface Bridge-Aggregation 20, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 20
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation20
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Priority Oper-Key
--------------------------------------------------------------------------------
XGE1/0/1 U 32768 1
XGE1/0/2 U 32768 1
XGE1/0/3 U 32768 1
Table 25 Command output
Field Descri
p
tion
Loadsharing Type
Load-sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Port Status Port state: Selected or Unselected.
Flags
LACP state flags. This field is one byte long, represented by ABCDEFGH from the
least significant bit to the most significant bit. The letter is present when its bit is 1
and absent when its bit is 0.
• A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates
disabled.
• B—Indicates the LACP short or long timeout. 1 indicates short timeout, and 0
indicates long timeout.
• C—Indicates whether the sending system considers that the link is aggregatable.
1 indicates yes, and 0 indicates no.
• D—Indicates whether the sending system considers that the link is synchronized.
1 indicates yes, and 0 indicates no.
• E—Indicates whether the sending system considers that the incoming frames are
collected. 1 indicates yes, and 0 indicates no.
• F—Indicates whether the sending system considers that the outgoing frames are
distributed. 1 indicates yes, and 0 indicates no.
• G—Indicates whether the sending system receives frames in the default state. 1
indicates yes, and 0 indicates no.
• H—Indicates whether the sending system receives frames in the expired state. 1
indicates yes, and 0 indicates no.
Aggregate Interface Name of the aggregate interface.