R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

98
Default
The system LACP priority is 32768.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
system-priority: Specifies the system LACP priority in the range of 0 to 65535. The smaller the value, the
higher the system LACP priority.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64
Related commands
link-aggregation port-priority
link-aggregation global load-sharing mode
Use link-aggregation global load-sharing mode to configure the global link-aggregation load sharing
criteria.
Use undo link-aggregation global load-sharing mode to restore the default setting.
Syntax
link-aggregation global load-sharing mode { destination-ip | destination-mac | destination-port |
ingress-port | source-ip | source-mac | source-port } *
undo link-aggregation global load-sharing mode
Default
The system automatically chooses link-aggregation load sharing criteria based on packet types.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
destination-ip: Performs load sharing in link aggregation groups based on destination IP address.
destination-mac: Performs load sharing in link aggregation groups based on destination MAC address.
destination-port: Performs load sharing in link aggregation groups based on destination port.
ingress-port: Performs load sharing in link aggregation groups based on ingress port.