R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

99
source-ip: Performs load sharing in link aggregation groups based on source IP address.
source-mac: Performs load sharing in link aggregation groups based on source MAC address.
source-port: Performs load sharing in link aggregation groups based on source port.
Usage guidelines
The load sharing criteria that you configure overwrite the previous criteria.
If unsupported load sharing criteria are configured, an error prompt appears.
In system view, the switch supports the following load sharing criteria and combinations:
• Source IP address
• Destination IP address
• Source MAC address
• Destination MAC address
• Source IP address and destination IP address
• Source IP address and source port
• Destination IP address and destination port
• Source IP address, source port, destination IP address, and destination port
• Any combination of ingress port, source MAC address, and destination MAC address
Examples
# Configure the destination MAC address as the global link-aggregation load sharing criterion.
<Sysname> system-view
[Sysname] link-aggregation global load-sharing mode destination-mac
Related commands
link-aggregation load-sharing mode
link-aggregation ignore vlan
Use link-aggregation ignore vlan to configure a Layer 2 aggregate interface to ignore the specified
VLANs.
Use undo link-aggregation ignore vlan to restore the default.
Syntax
link-aggregation ignore vlan vlan-id-list
undo link-aggregation ignore vlan vlan-id-list
Default
A Layer 2 aggregate interface does not ignore any VLANs.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin