R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

102
• Destination MAC address
• Layer 1 MPLS label.
• Destination IP address and source IP address
• Destination MAC address and source MAC address
• Layer 1 MPLS label and Layer 2 MPLS label
Examples
# Configure the destination MAC address as the load sharing criterion that is specific to the link
aggregation group of aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation load-sharing mode destination-mac
Related commands
link-aggregation global load-sharing mode
link-aggregation load-sharing mode local-first
Use link-aggregation load-sharing mode local-first to enable local-first load sharing for link
aggregation.
Use undo link-aggregation load-sharing mode local-first to disable local-first load sharing for link
aggregation.
Syntax
link-aggregation load-sharing mode local-first
undo link-aggregation load-sharing mode local-first
Default
Local-first load sharing is enabled for link aggregation.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You can configure this feature only when the system operates in the IRF mode.
When you disable local-first load sharing for link aggregation, the packets will be load-shared among
all Selected ports of the aggregate interface on all IRF member devices.
Local-first load sharing for link aggregation takes effect on only known unicast packets.
Examples
# Disable local-first load sharing for link aggregation.
<Sysname> system-view
[Sysname] undo link-aggregation load-sharing mode local-first