R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

103
link-aggregation mode
Use link-aggregation mode dynamic to configure an aggregation group to operate in dynamic
aggregation mode and enable LACP.
Use undo link-aggregation mode to restore the default setting.
Syntax
link-aggregation mode dynamic
undo link-aggregation mode
Default
An aggregation group operates in static aggregation mode.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Configure the aggregation group that corresponds to Bridge-Aggregation 1 to operate in dynamic
aggregation mode.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation mode dynamic
link-aggregation port-priority
Use link-aggregation port-priority to set the port priority of an interface.
Use undo link-aggregation port-priority to restore the default setting.
Syntax
link-aggregation port-priority port-priority
undo link-aggregation port-priority
Default
The port priority of an interface is 32768.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
port-priority: Specifies the port priority in the range of 0 to 65535. The smaller the value, the higher the
port priority.