R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

105
Examples
# Configure the maximum number of Selected ports allowed as 5 in the aggregation group that
corresponds to Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port maximum 5
Related commands
• link-aggregation irf-enhanced
• link-aggregation selected-port minimum
link-aggregation selected-port minimum
Use link-aggregation selected-port minimum to configure the minimum number of Selected ports in the
aggregation group.
Use undo link-aggregation selected-port minimum to restore the default setting.
Syntax
link-aggregation selected-port minimum number
undo link-aggregation selected-port minimum
Default
The minimum number of Selected ports in an aggregation group is not specified.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies the minimum number of Selected ports in an aggregation group required to bring up
the aggregate interface. The value range is 1 to 16.
Usage guidelines
Executing this command might cause all member ports in the aggregation group to become unselected.
The minimum number of Selected ports allowed in the aggregation groups of the local and peer ends
must be consistent.
Examples
# Configure the minimum number of Selected ports as 3 in the aggregation group that corresponds to
Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port minimum 3
Related commands
link-aggregation selected-port maximum