R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

107
Usage guidelines
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear its existing
statistics.
If no option is specified, the command clears the statistics for all interfaces in the system.
If only the bridge-aggregation keyword is specified, the command clears the statistics for all Layer 2
aggregate interfaces.
If the bridge-aggregation interface-number option is specified, the command clears the statistics for the
specified Layer 2 aggregate interface.
The bridge-aggregation keyword becomes available only after you create Layer 2 aggregate interfaces
on the switch.
Examples
# Clear the statistics for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Use reset lacp statistics to clear the LACP statistics on the specified member ports or all member ports.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number indicates
the port type and port number. If no member ports are specified, the command clears the LACP statistics
on all member ports.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port
shutdown
Use shutdown to shut down the aggregate interface.
Use undo shutdown to bring up the aggregate interface.