R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

125
display stp region-configuration
Use display stp region-configuration to display effective MST region configuration information, including
the region name, revision level, and user-configured VLAN-to-instance mappings.
Syntax
display stp region-configuration
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# In MSTP mode, display effective MST region configuration information.
<Sysname> display stp region-configuration
Oper Configuration
Format selector : 0
Region name : hello
Revision level : 0
Configuration digest : 0x5f762d9a46311effb7a488a3267fca9f
Instance VLANs Mapped
0 21 to 4094
1 1 to 10
2 11 to 20
Table 34 Command output
Field Descri
p
tion
Format selector
Format selector that is defined by the spanning tree protocol. The default value
is 0, and the selector cannot be configured.
Region name MST region name.
Revision level
Revision level of the MST region. The default value is 0, and the level can be
configured by using the revision-level command.
VLANs Mapped VLANs mapped to the MSTI.
Related commands
• instance
• region-name
• revision-level
• vlan-mapping modulo