R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

130
• instance
• revision-level
• vlan-mapping modulo
reset stp
Use reset stp to clear spanning tree statistics. The spanning tree statistics include the numbers of TCN
BPDUs, configuration BPDUs, RST BPDUs, and MST BPDUs that are sent and received through the
specified ports.
Syntax
reset stp [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-list: Clears the spanning tree statistics of the ports that are specified in the format of
interface-list = { interface-type interface-number [ to interface-type interface-number ] }&<1-10>, where
&<1-10> indicates that you can specify up to 10 ports or port ranges. If you do not specify this option,
this command clears the spanning tree statistics on all ports.
Examples
# Clear the spanning tree statistics on ports Ten-GigabitEthernet 1/0/1 through Ten-GigabitEthernet
1/0/3.
<Sysname> reset stp interface ten-gigabitethernet 1/0/1 to ten-gigabitethernet 1/0/3
Related commands
display stp
revision-level
Use revision-level to configure the MSTP revision level.
Use undo revision-level to restore the default MSTP revision level.
Syntax
revision-level level
undo revision-level
Default
The MSTP revision level is 0.
Views
MST region view