R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

9
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in the down state and the causes. If you do not specify this
keyword, this command displays information about interfaces in all states.
description: Displays the full description of the specified interface. If the keyword is not specified, the
command displays at most the first 27 characters of the interface description. If the keyword is specified,
the command displays all characters of the interface description.
Usage guidelines
If no interface type is specified, this command displays information about all interfaces.
If an interface type is specified but no interface number is specified, this command displays information
about all interfaces of that type.
If both the interface type and interface number are specified, this command displays information about
the specified interface.
Examples
# Display information about Layer 3 interface Ten-GigabitEthernet 1/0/1.
<Sysname> display interface ten-gigabitethernet 1/0/1
Ten-GigabitEthernet1/0/1
Current state: UP
Line protocol state: UP
Description: Ten-GigabitEthernet1/0/1 Interface
Bandwidth: 10000000kbps
Maximum Transmit Unit: 1500
Internet protocol processing: disabled
IP Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 000c-1000-1112
IPv6 Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 000c-1000-1112
Media type is stack wire, Port hardware type is STACK_SFP_PLUS
Port priority: 0
10Gbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
The Maximum Frame Length is 9216
Last clearing of counters: Never
Peak value of input: 0 bytes/sec, at 2013-12-13 17:07:10
Peak value of output: 0 bytes/sec, at 2013-12-13 17:07:10
Last 300 seconds input: 0 packets/sec 0 bytes/sec