R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

10
Last 300 seconds output: 0 packets/sec 0 bytes/sec
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
Table 4 Command output
Field Description
Current state
State of the interface:
• Administratively DOWN—The Ethernet interface was shut down
with the shutdown command. The interface is administratively
down.
• DOWN—The Ethernet interface is administratively up but
physically down (possibly because no physical link is present or
the link has failed).
• UP—The Ethernet interface is both administratively and physically
up.
Line protocol state
Link layer state of the interface. The state is determined through
parameter negotiation on the link layer.
• UP—The interface is up at the data link layer.
• UP (spoofing)—The link layer protocol of an interface is UP, but its
link is an on-demand link or not present at all. This attribute is
typical of Null interfaces and loopback interfaces.
• DOWN—The interface is down at the data link layer.
• DOWN (DLDP DOWN)—The link layer protocol of the interface is
down because DLDP detected that the link was unidirectional.
• DOWN (LAGG DOWN)—The link layer protocol of the interface is
down because the aggregate interface does not have Selected
ports.
• DOWN (OAM DOWN)—The link layer of the interface is down
because OAM detected remote link failures.
• DOWN (DLDP and LAGG DOWN)—The link layer of the interface
is shut down by DLDP and LAGG.
• DOWN (DLDP and OAM DOWN)—The link layer of the interface
is shut down by DLDP and OAM.
• DOWN (OAM and LAGG DOWN)—The link layer of the interface
is shut down by OAM and LAGG.
• DOWN (DLDP, OAM and LAGG DOWN)—The link layer of the
interface is shut down by DLDP, OAM, and LAGG.