R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

169
Field Description
Internet protocol processing : disabled
The interface is not capable of processing IP packets. This
information is displayed when the interface is not configured with
an IP address.
Internet Address is 192.168.1.54/24
Primary
The primary IP address of the interface is 192.168.1.54/24. This
information is displayed only if the primary IP address is configured
for the interface.
P Packet Frame Type IPv4 outgoing frame format.
Hardware Address MAC address that corresponds to a VLAN interface.
IPv6 Packet Frame Type IPv6 outgoing frame format.
Brief information on interface(s) under
route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively down; Stby
– standby
Link layer state of the interface:
• ADM—The interface has been administratively shut down. To
recover its physical state, run the undo shutdown command.
• Stby—The interface is operating as a standby interface.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP,
but its link is an on-demand link or not present at all, its protocol
attribute includes the spoofing flag (which is a letter s in
parentheses).
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is up.
• ADM—The link has been administratively shut down. To recover
its physical state, run the undo shutdown command.
Protocol
Protocol connection state of the interface:
• UP.
• DOWN.
• UP(s).
Main IP Main IP address of the interface.
Description Description of the interface.
display vlan
Use display vlan to display VLAN information.
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
Views
Any view
Predefined user roles
network-admin
network-operator