R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

170
mdc-admin
mdc-operator
Parameters
vlan-id1: Displays information about a VLAN specified by its VLAN ID. The value range for this argument
is 1 to 4094.
vlan-id1 to vlan-id2: Displays information about VLANs that are specified by a VLAN ID range. The
vlan-id1 and vlan-id2 arguments specify VLAN IDs. The value range for each of the two arguments is 1
to 4094. The vlan-id1 argument cannot be greater than the vlan-id2 argument.
all: Displays all VLAN information except for the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID for each dynamic VLAN.
reserved: Displays information about the reserved VLANs. Protocol modules determine which VLANs are
reserved VLANs according to function implementation, and reserved VLANs serve protocol modules.
You cannot configure reserved VLANs.
static: Displays the number of static VLANs and the ID for each static VLAN. The static VLANs are
manually created.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN type: Static
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged ports: None
Untagged ports:
Ten-GigabitEthernet1/0/1 Ten-GigabitEthernet1/0/2 Ten-GigabitEthernet1/0/3
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN type: static
Route interface: Configured
IP address: 1.1.1.1
Subnet mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged ports: None
Untagged ports: None
Table 39 Command output
Field Description
VLAN type VLAN type, static or dynamic.
Route interface
Indicates whether the VLAN interface is configured.
• Not configured.
• Configured.