R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

175
Syntax
vlan { vlan-id1 [ to vlan-id2 ] | all }
undo vlan { vlan-id1 [ to vlan-id2 ] | all }
Default
VLAN 1 (the default VLAN) exists.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan-id1, vlan-id2: Specifies a VLAN ID. The value range is 1 to 4094.
vlan-id1 to vlan-id2: Specifies a VLAN range. The vlan-id1 and vlan-id2 arguments specify VLAN IDs.
The value range for each of the two arguments is 1 to 4094. The vlan-id1 argument cannot be greater
than vlan-id2.
all: Creates or removes all VLANs except reserved VLANs.
Usage guidelines
You cannot create or remove the default VLAN (VLAN 1).
You cannot create or remove VLANs that are reserved for specific functions.
You cannot use the undo vlan command to delete a dynamic VLAN, a VLAN with a QoS policy applied,
or a VLAN locked by an application. To delete such a VLAN, first remove the configuration from the
VLAN.
Examples
# Create VLAN 2 and enter its view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2]
# Create VLAN 4 through VLAN 100.
<Sysname> system-view
[Sysname] vlan 4 to 100
Related commands
display vlan
Port-based VLAN commands
display port
Use display port to display information about the hybrid or trunk ports on the device, including the port
names, PVIDs, and allowed VLAN IDs.